SOLD – Kees van der Westen Mistral
Posted on June 16th, 2015
Mistral machine no. 32
Kees van der Westen
![cm20150603_Kees-van-der-westen---Mistral-Duette-rear-V1](http://machinist.rodrickbond.com/wp-content/uploads/2015/06/cm20150603_Kees-van-der-westen-Mistral-Duette-rear-V1-940x636.jpg)
![cm20150603_Kees-van-der-westen---Mistral-Duette-front-V1](http://machinist.rodrickbond.com/wp-content/uploads/2015/06/cm20150603_Kees-van-der-westen-Mistral-Duette-front-V1-940x626.jpg)
![cm20150603_Kees-van-der-westen---Mistral-Duette-side-V1](http://machinist.rodrickbond.com/wp-content/uploads/2015/06/cm20150603_Kees-van-der-westen-Mistral-Duette-side-V1-940x711.jpg)
- Complete nuts and bolts rebuild – new legs, chassis powdercoat, and full re-polish of panels. Every gasket and valve replaced. Over a year part time on the project at this stage!
- New coffee boiler.
- Insulated steam boiler.
- A total of three PIDs, one for the coffee boiler and one per group cap via cartridge elements. Steam is pstat/SSR.
- Power is 25 Amp single phase, about 5 amps more than original.
- Steam valves converted to lever type, one lock-on direction forward and momentary purge backward. Valve bodies are Nuova Simonelli adapted and feature a LM anti-vac valve on each wand.
- Custom paddle switch – functionally the same as Marzocco MP group, two stage operation, but electrical rather than mechanical so there are no seals to change.
- Chronos key pads for shot clock, volumetrics on both groups with a manually controllable preinfusion function. Use either touchpad or manual paddle at any time. I find I like to flush with the paddle and pour shots via the touchpad.
- Custom made dispersion block in POM-C (same as current Speedster setup) for cleaning ease, temp stability.